- Address1500E.Bishop Court,P.O.Box Mount Prospect,IL60078-7603,U.S.A.
- Phone(Working Time)753-298-7805
Bearing Adapter Sleeves
Contact NowAdapter sleeves are the most commonly used components for locating bearings with a tapered bore onto a cylindrical seat as they can be used on plain shafts or stepped shafts.
They are easy to install and require no additional location on the shaft. When used on plain shafts, the bearing can be located at any position on the shaft. When used on stepped shafts together with an L-shaped spacer ring, the bearing can be accurately positioned axially, thereby facilitating bearing mounting and dismounting.
In adapter mounting, a tapered bore bearing is mounted onto a cylindrical shaft through the use of a tapered adapter sleeve. Many typical split pillow block applications use an adapter sleeve to mount. The shaft seat does not need to be machined to the precision tolerances for cylindrical mounting and heating is not required. Driving the bearing up the taper achieves the correct mating of the components and reduces the bearing clearance to the level dictated by the application. No additional location on the shaft is required. Total costs associated with tapered mounting are typically lower than cylindrical mounting.
Adapter sleeves are the most commonly used components for locating bearings with a tapered bore onto a cylindrical seat as they can be used on: plain shafts or stepped shafts.
Bearing Number | Bore Dia | Outer DIa | Width | Size |
---|---|---|---|---|
FAG H2334 Bearing Adapter Sleeves | 52 mm | 43 mm | 0.6 mm | 51 kN |
FAG H2318 Bearing Adapter Sleeves | 2.00 mm | 2200 rpm | 55.60 mm | 2200 rpm |
SKF H 204 Bearing Adapter Sleeves | 8500 rpm | 9.00 mm | 5000 N | 30.000 mm |
Timken SNW-3026 X 4 7/16 Bearing Adapter Sleeves | 632 mm | 270 mm | 10000 kN | 2.2 |
Timken SNW-30 X 5 3/16 Bearing Adapter Sleeves | G 1/4 | HMV 150 E | 386 mm | HM 31/750 |
FAG H3052X-HG Bearing Adapter Sleeves | 1300 rpm | One Seal | 530000 N | 65.00 mm |
Standard Locknut SNP 3064 Bearing Adapter Sleeves | 140 mm | 11.5 mm | 111.2 mm | 1 mm |
NSK SNW134 Bearing Adapter Sleeves | 1.05 | 22.7 mm | 0.3 mm | 33.6 mm |
Standard Locknut 3048X9.000 Bearing Adapter Sleeves | 244 mm | 114 mm | 31 mm | M 45x3 |
Standard Locknut SNW 144 Bearing Adapter Sleeves | 190.0000 mm | 71000 N | 140.000 mm | 3800 rpm |
NSK SNW124X403 Bearing Adapter Sleeves | 296 mm | 79.5 kg | 320 mm | HMV 120 E |
Miether Bearing Prod (Standard Locknut) SNW 3140 X 7-3/16 Bearing Adapter Sleeves | 1.00 mm | Two Shields & Snap-R | 7000 rpm | 32500 N |